Login

Monitoring / centralized monitoring of your system

We are the creators of this system, so we can offer you an individual, high-quality solution that best meets the needs and possibilities of a company, a renovated apartment building or a private home, a newly built individual house, an office center, a production workshop, an accommodation facility, etc.
Operating principle. The Sys2eco monitoring system includes the scanning, transmission, storage of data collected by monitored devices, processing, display in a personalized website account, regardless of the physical location of the devices (Internet connection is a prerequisite), and the accompanying messaging module allows the user to receive system notifications. changes.
The system is built on a hierarchical principle, ie the account administrator can monitor, manage all objects in his system, manage the alert system, receive notifications, create accounts for his users with personalized access and limited, personalized information.

Equipment. In addition to Danfoss, Dixell, Carell, Eastron controllers, other devices of similar purpose can be installed in the Sys2eco monitoring system. If the user is not satisfied with the series production equipment, we can offer our solutions.
All sensors visible in the system can be assigned individual names.
Each installed device (controller) has a certain number of sensors. If there is a greater need for temperature sensors than the capabilities of a particular device (controller) allow, it is possible to Sys2eco GW module connect (optional):
- digital sensors operating in the range -64 oC ... 128 oC with an error of 0.1 oC (the supplied sensors are installed by the user);
- Ax10 expansion module, which allows to connect up to 10 units of NTC type sensors;
- Wireless modules that can measure temperatures up to 20 digital sensors can control up to 2 additional outputs (eg "restart", "stop"), together monitor up to 2 outputs (eg left lighting, open doors, etc.).

User interface. Login. The user can access the website from his personalized account (by entering the e-mail address and password registered in the system) from any device with a web browser and an Internet connection. Logged in can monitor the data of all devices connected to the system in real time. Each device (controller) has a separate settings and control unit.
Devices. Each device (controller, freezer) can have a unique name. During the installation of the system, the desired names of the devices (controllers, freezers) are provided by the user. If there are no names or they are not needed, the devices (controllers, freezers) are numbered in ascending order, in the order of connection: 1, 2, 3, etc. At the user's request (for an additional fee) a drawn image of the device layout, plan, etc.
Data. The monitoring system reads all the data provided by the connected specific device (controller) (temperature values, operating devices, error messages, etc.). Data for all user devices (controllers) connected to the Sys2eco monitoring system is presented in one simplified, minimized account. If necessary, it can be adjusted, ie additional components are output, depending on the characteristics of the specific connected device (controller). Can be provided in a list, table, diagram or the like.
After logging in to the user account, the data of the system devices is visible at the monitored moment. Data from previous periods can be viewed graphically by selecting the desired period (minimum time interval - 15 minutes).
Notification system. If the system malfunctions or the set indicators reach the set critical values, the system user is informed by e-mail. by e-mail registered in the system. by e-mail address / addresses or by SMS message to the telephone (s) registered in the system. The user logged in to the system enters the data of the person (or persons) who will receive the messages.
The user determines which parameters change and what type (e-mail, SMS or both at the same time) the message will be sent. Notifications are sent when there is any change in the set limits:
- when the set value exceeds the defined limits / the value returns to normal;
- sensor not available / sensor available;
- (Device) controller not available / (Device) controller available.
Ways to use system device data:
- For individual use. Logs in to a personalized account with the login and password provided. The user can monitor the data collected by the devices (controllers) connected to the system; adjust settings; turn on, turn off devices; adjust messaging system settings.
- For demonstration (optional). For public viewing, accessible online without authorization (views have a short internet access address, e.g. http://2demo.mine.nu ) there is no possibility to change, regulate the operation of system components, settings.
Share by: